|
|
|
|
-
This OMARV Haylage Harvester Has a 6" Dia. Heavy Duty Rotor With 27 Large, Swinging/Hanging, Hardened Steel Hammer Type Blades:
-
OMARV Harvesters Always Have The Highest Population of Blades To Provide The Best Possible Cut & Reduce The Burden On Your Tractor!
-
23" Blade Tip To Blade Tip Diameter!
-
Blades Are Cupped For Maximum Blowing Propulsion!
-
These Substantial Blades Can Be Sharpened Multiple Times & Typically Have A Very Long Life!
-
Swinging/Hanging Blades Provide Protection Against Fixed Objects Like Rocks, Stumps, etc!
-
Blades Cut Against Two Counter Blades: One Large Primary (1"x4"x3"x13/16"Thick) Modified 'C' Channel Counter Blade At Lower Front & One 3"x1/8" At Top Rear For Final Reduction.
-
Primary Counter Blade Has 2" Of Gap Adjustment (Edge of Channel to Edge of Blades) To Control Clipping Size & Demand Back To Your Tractor.
-
Primary Counter Blade Is Factory Set At Mid Cutting Range, Providing 1" Additional Closing Or Opening!
-
Both Counter Blades Are Bolt-On For Ease Of Adjustment & Replacement!
-
Discharge Neck Rotates Hydraulically For 'On-The-Fly' Positioning:
-
Rotates From Rear Center 25° Clockwise.
-
Set Towards The Rear To Fill A Forage Wagon, Barge Box, Etc.
-
Swing 25° Rear Center To Right To Disperse Cover Crop, Unharvested Produce, etc!
-
Deflector Is Also Hydraulically Adjustable For 'On-The-Fly' Positioning!
-
OMARV Gearboxes Include an Over-Running Clutch, Which Provides Two Advantages:
-
First, Easy Alignment & Attachment of the Mowers PTO Shaft to the Tractors PTO Shaft:
-
The O.R. Clutch Enables you to Freely Spin the PTO Shaft & Gearbox for Alignment!
-
Second, Smooth Shut Down:
-
The O.R. Clutch Allows the Mower Gearbox to Free Wheel to a Stop, Eliminating Abrupt Shutdowns & Wear of the PTO Brake!
-
Clevis Style Pinned Connection At Rear For Trailer Tongue Connection.
-
Some Sample Images Show Tractor For Reference Only - Tractor Is Not Included.
-
Mower Includes 540RPM PTO Shaft!
-
Suitable for 60-100HP Tractors.
-
Clevis Style Pinned Drawbar Connection To Tractor.
-
Working Width: 72".
-
Overall Width: 9'-1".
-
Overall Depth: 70" & 34" Of Drawbar.
-
Overall Height: 12'-2".
-
Cutting Height Can Be Set From 2"-12"!
-
Electronically Balanced Rotor Has 27 Large Hardened Steel Hammer Blades:
-
Blade Dimensions: 5-1/2" Tall x 3-1/8" Wide x 5/16" Thick!
-
Blade Tip To Blade Tip Diameter: 23".
-
Rotor & Hardened Hammer Blades Rated To Cut Up To 1.5" Diameter Material.
-
Rotor Diameter: 6".
-
Discharge Spout Dimension (Pre-Deflector): 7" x 10".
-
Tires Are: 5.50 x 16".
-
Weight: 1,835lb's (Less PTO Shaft, Pallet/Crating, etc.).
-
Specifications are based on manufacturer provided data & subject to change.
|
|
|
|
|
|
|